Pre-Color is a water-based stain for coloring untreated wood. This stain is available in white, gray and black and suitable for floors, stairs, furniture, panels, etc ...
Thanks to the extra pigments, the color of the final finish can be emphasized. For example, Pre-Color white is best finished with an extra white oil for the lightest possible result, gray Pre-Color with a gray or extra gray oil and black Pre-Color with black color oil.
Pre-Color gives wood a full color in white, gray, brown or black.
Pre-clean the wood with a solution of Intensive cleaner and water (1:40). Then let it dry completely. Apply Pre-Color evenly with the special paint roller listed below and work towards the wood and let it dry overnight. The next day, lightly polish with an abrasive pad (maroon pad below) and then finish with Master Colouroil or Diamond Oil Active.
For the best and most even result, Pre-Color can also be rubbed wet-on-wet into the wood immediately after application with a beige polishing pad. Do not forget the edges and corners! The next day the wood can be finished with oil. Download the detailed instruction for additional information.
The leaching treatment does not protect the wood and must therefore always be followed by a treatment with Master Colouroil or Diamond Oil Active.
Maintenance and cleaning depending on the chosen final finish.
Consumption: 8-12 m2
Packaging: 2.5 liters
Colors: white, gray, brown and black
The 3rd photo is of course an example of the Pre Color Gray.