Exterior Oil Natural for Terrace, Furniture, Log Cabin etc.
(excl. btw €30,54)
Woca Exterior Oil is a revolutionary water-based oil for exterior wood. Exterior Oil is quick-drying and has a matte, natural appearance. The surface is protected for a long time thanks to the special pigments. Maintenance is very simple, surface ...
- Buy 4 for €36,58 each and save 1%
- Buy 12 for €36,21 each and save 2%
- Buy 60 for €35,84 each and save 3%
- Ordered before 17:00:00, delivered tomorrow
- Altijd de laagste prijs (Minimaal 35% korting op de winkelprijs)
- Kies zelf uw verzendwijze zoals Spoed, Avond, Servicepunt etc.
- Achteraf betalen na 30 dagen met Afterpay
- More information? Contact us about this product
WOCA Exterior Wood Oil Natural for decking and exterior wood
WOCA Exterior Wood Oil Natural is a water-based exterior wood oil for the initial treatment and periodic maintenance of wooden decking, garden furniture, exterior cladding, fences, log cabins, windows and other outdoor wood.
The Natural version enhances the original colour of the wood and emphasises its natural grain and structure. It gives the surface a warm, naturally oiled appearance without applying a strongly pigmented colour.
The oil penetrates the wood and creates a strong water- and dirt-resistant, breathable, open-pore surface. WOCA Exterior Wood Oil contains a UV filter, has a thick and easy-to-control consistency and dries relatively quickly.
Always test the product on a small, inconspicuous area first. The final appearance depends on the wood species, original colour, weathering, absorbency and preparation of the surface.
Benefits of WOCA Exterior Wood Oil Natural
-
Water-based oil for exterior wood
-
Enhances the natural colour and grain of the wood
-
Creates a warm, naturally oiled appearance
-
Suitable for new, untreated and previously oiled exterior wood
-
Provides a strong water- and dirt-resistant surface
-
Contains a UV filter
-
Creates a breathable, open-pore finish
-
Thick consistency for controlled application
-
Low-drip formula when correctly applied
-
Fast-drying
-
Suitable for initial treatment and periodic maintenance
-
Ideal for decking, garden furniture, cladding, fences and log cabins
-
Indicative coverage: approximately 8–12 m² per litre
Always use our recommended rollers, brushes and application materials
The final result is not determined by the oil alone. Using the correct tools helps to distribute WOCA Exterior Wood Oil in a thin, even layer without unnecessary roller marks or visible overlaps.
We therefore recommend using the professional rollers, brushes, cotton cloths and pads shown at the bottom of this product page under Related Products.
We recommend:
-
Tisa-Line 25 cm roller with frame: for decking, cladding and other large, flat surfaces
-
Tisa-Line mini rollers with frame: for garden furniture, narrow boards and smaller projects
-
Special flat brush: for boards, edges and general brush application
-
Special round brush: for grooves, joints and difficult-to-reach areas
-
10 × 3 cm block brush: for quickly distributing oil over wider or rougher wooden surfaces
-
Professional extension pole: for comfortable and even application on decking
-
Cotton cloths: for removing all excess oil
-
White pads: for levelling and buffing the surface after drying
Do not use an unsuitable, low-quality roller or brush. It may apply too much or too little oil, shed fibres or cause stripes and uneven areas.
View all professional brushes and rollers
The recommended application materials can also be found directly below this description under Related Products.
Where can WOCA Exterior Wood Oil Natural be used?
WOCA Exterior Wood Oil Natural is suitable for exterior applications including:
-
Wooden decking and terraces
-
Garden furniture
-
Log cabins and garden buildings
-
Exterior wood cladding
-
Fences and gates
-
Wooden windows and frames
-
Pergolas and covered outdoor structures
-
Other untreated or previously oiled exterior wood
Natural is particularly suitable when you want to enhance the existing colour of the wood while keeping its original grain clearly visible.
Preparing the exterior wood
Careful preparation is essential for an even and durable result.
Clean both new and previously treated exterior wood with WOCA Exterior Cleaner before applying the oil.
For heavily soiled, weathered or grey wood, use WOCA Exterior Deep Cleaner/Wood Degreyer.
Rinse the wood thoroughly according to the product instructions and allow it to dry. The moisture content of the wood must not exceed 17% when the oil is applied.
Remove any raised wood fibres with suitable sandpaper, approximately grit 120–150. Carefully remove all sanding dust afterwards.
Untreated, non-impregnated softwood should first be treated with WOCA Exterior Wood Primer. Red cedar and larch are exceptions to this general recommendation.
Always carry out a test application first to assess adhesion, absorption and the final colour.
Applying WOCA Exterior Wood Oil Natural
Only treat the wood in dry weather and at an outdoor temperature of at least 13°C. Avoid application in direct sunlight, extreme heat or when rain is expected during the drying period.
Stir the oil thoroughly before and during application. The Natural version must also be mixed carefully to distribute all ingredients evenly.
Step 1 – End grain and difficult areas
Start by treating the end grain, edges, grooves and joints with our suitable flat, round or block brush.
End grain generally absorbs more moisture and oil and therefore requires extra attention.
Step 2 – Treating large surfaces
Apply a thin and even coat to decking, cladding and other large surfaces using our 25 cm Tisa-Line roller.
Use our mini rollers for garden furniture, narrow boards and smaller areas. Carefully finish edges, grooves and joints with a suitable brush.
Work in manageable sections and follow the direction of the wood grain wherever possible.
Do not apply a thick, film-forming layer. WOCA Exterior Wood Oil must penetrate the wood and must not remain on the surface as a wet coating.
Step 3 – Removing excess oil
The oil has a creamy appearance during application. After a few minutes, the water begins to evaporate and the wood develops its oiled appearance.
Check each treated section after no more than five minutes and remove all excess oil with our clean cotton cloths.
Pay particular attention to grooves, joints, connections and recessed areas. No wet, glossy or thick patches of oil should remain on the surface.
Oil that is not completely removed may dry unevenly and leave the surface sticky.
Step 4 – Checking absorption
If the wood still appears dry or insufficiently saturated after the first treatment, the application may be repeated.
Apply another thin coat and remove all excess oil again.
Professional finishing with a white pad
Once the surface is sufficiently dry, the wood can be buffed with a white hand pad or a suitable single-disc machine fitted with a white polishing pad.
This helps to produce a smooth and even finish and may further improve the wear resistance of the surface.
Suitable white pads are available at the bottom of this product page under Related Products.
Drying and curing time
At approximately 20°C and under normal weather conditions, WOCA Exterior Wood Oil requires approximately 24–48 hours to cure fully.
During this period, protect the treated wood from:
-
Rain and other water
-
Dew and condensation
-
Intensive use
-
Wet objects
-
Covering with non-breathable materials
Lower temperatures, high humidity and insufficient ventilation may extend the drying time.
Maintaining oiled exterior wood
Inspect the treated wood at least once a year. Maintenance is required when the surface starts to look dry, dull or uneven, or when water is absorbed more quickly.
Clean the surface with WOCA Exterior Cleaner and allow the wood to dry completely. Then apply another thin and even coat of WOCA Exterior Wood Oil Natural using our recommended rollers and brushes.
For normal maintenance, it is not always necessary to sand the wood completely back to bare timber. Loose wood fibres, damage, heavily weathered layers and uneven areas must, however, be carefully removed or lightly sanded before applying fresh oil.
Coverage and application conditions
-
Indicative coverage: approximately 8–12 m² per litre
-
Maximum wood moisture content: 17%
-
Minimum application temperature: 13°C
-
Drying and curing time: approximately 24–48 hours at around 20°C
-
Application: exterior use only
Actual coverage depends on the wood species, absorbency, surface condition and application method.
Select the required container size at the top of this product page.
Important safety information
Always follow the safety instructions on the container and in the technical documentation. Wear suitable protective gloves and avoid contact with skin and eyes.
Do not allow oil or contaminated cleaning water to enter the soil, drains or surface water. Keep the product out of reach of children.
Handle used cloths and pads carefully and follow the instructions on the packaging for safe storage and disposal.
Technical information and brochure
Download the technical information for WOCA Exterior Wood Oil
View the WOCA Exterior Oil brochure
For the best possible result, use the professional rollers, brushes, cotton cloths, pads and other application materials shown at the bottom of this product page.